Sodium Aluminate(sodium Metaaluminate)
Physical Properties
Solid sodium aluminate is one type of strong alkaline product appearing as white powder or fine granular, colorless, odorless and taste-less, Non flammable and non explosive, It has good solubility and is easily soluble in water,quick to clarify and easy to absorb moisture and carbon dioxide in the air. It is easy to precipitate aluminium hydroxide after dissolution in water.
Performance Parameters
|
Item |
Specificiton |
Results |
|
Appearance |
White powder |
Pass |
|
NaA1O₂(%) |
≥80 |
81.43 |
|
AL₂O₃(%) |
≥50 |
50.64 |
|
PH(1% Water Solution) |
≥12 |
13.5 |
|
Na₂O(%) |
≥37 |
39.37 |
|
Na₂O/AL₂O₃ |
1.25±0.05 |
1.28 |
|
Fe(ppm) |
≤150 |
65.73 |
|
Water insoluble matter(%) |
≤0.5 |
0.07 |
|
Conclusion |
Pass |
|
Product Characteristics
Adopt the technology with independent intellectual property rights and carry out strict production as per relevant standards. Select high quality materials with higher purity, uniform particles and stable color. Sodium aluminate can play an irreplaceable role in the field of alkali applications, and it provides a source of high-activity aluminium oxide. (Our company can produce prod-ucts with special content based on the customer's requirements.）
Application Area
1.Suitable for various types of industrial wastewater: mine water, chemical wastewater, power plant circulating water, heavy oil wastewater, domestic sewage, coal chemical wastewater treatment, etc.
2.Advanced purification treatment for various types of hardness removal in wastewater.
3.Be widely used in petrochemical catalysts, fine chemicals,lithium adsorbent,pharmaceutical beauty
and other fields.
Product Scope of Supply
|
Product |
Specification |
Vacuum Bayonet Connection with Clamps |
Vacuum Bayonet Connection with Flanges and Bolts |
Weld Insulated Connection |
Thread Connection |
|
Vacuum Insulated Flexible Hose |
DN8 |
YES |
YES |
YES |
YES |
|
DN15 |
YES |
YES |
YES |
YES |
|
|
DN20 |
YES |
YES |
YES |
YES |
|
|
DN25 |
YES |
YES |
YES |
YES |
|
|
DN32 |
/ |
YES |
YES |
/ |
|
|
DN40 |
/ |
YES |
YES |
/ |
|
|
DN50 |
/ |
YES |
YES |
/ |
|
|
DN65 |
/ |
YES |
YES |
/ |
|
|
DN80 |
/ |
YES |
YES |
/ |
|
|
DN100 |
/ |
/ |
YES |
/ |
|
|
DN125 |
/ |
/ |
YES |
/ |
|
|
DN150 |
/ |
/ |
YES |
/ |
Technical Characteristic
| Design Temperature | -196~90℃ （LHe：-270~90℃） |
| Ambient Temperature | -50~90℃ |
| Vacuum Leakage Rate | ≤1*10-10Pa*m3/S |
| Vacuum Level after Guarantee | ≤0.1 Pa |
| Insulated Method | High Vacuum Multi-Layer Insulation. |
| Adsorbent and Getter | Yes |
| Test Pressure | 1.15 Times Design Pressure |
| Medium | LO2、LN2、LAr、LH2、LHe、LEG、LNG |
Dynamic and Static Vacuum Insulated Flexible Hose
Vacuum Insulated (VI) Flexible Hose can be divided into Dynamic and Static VI Flexible Hose.
l The Static VI Hose is fully completed in the manufacturing factory.
l The Dynamic VI System is offered a more stable vacuum state by a continuous pumping of vacuum pump system on site, and vacuuming treatment will no longer take place in the factory. The rest of the assembly and process treatment is still in the manufacturing factory. So, the Dynamic VJ Piping needs to be equipped with a Vacuum Pump System.
| Dynamic Vacuum Insulated Flexible Hose | Static Vacuum Insulated Flexible Hose | |
| Introduction | The vacuum degree of the vacuum interlayer is monitored continuously, and the vacuum pump is automatically controlled to open and close, to ensure the stability and effectiveness of vacuum degree | VJ Flexible Hoses complete the vacuum insulation work in the manufacturing plant. |
| Advantages | The vacuum retention is more stable, basically eliminate the vacuum maintenance in the future working. | More economical investment and simple on-site installation |
| Vacuum Bayonet Connection Type with Clamps |
Applicative |
Applicative |
| Vacuum Bayonet Connection Type with Flanges and Bolts |
Applicative |
Applicative |
| Welded Connection Type |
Applicative |
Applicative |
| Thread Joint Connection Type |
Applicative |
Applicative |
Dynamic Vacuum Insulated Flexible Hose System: Consist of Vacuum Flexible Hoses, Jumper Hoses and Vacuum Pump System (including the vacuum pumps, solenoid valves and vacuum gauges). Easily installed in small room. The length of single Vacuum Insulated Flexible Hose can be customized according to customer’s requirements.
2.SPECIFICATION AND MODEL
HL-HX-X-000-00-X
Brand
HL Cryogenic Equipment
Description
HD: Dynamic VI Hose
HS: Static VI Hose
Connection Type
W: Welded Connection Type
B: Vacuum Bayonet Connection Type with Clamps
F: Vacuum Bayonet Connection Type with Flanges and bolts
T:Thread Joint Connection Type
Nominal Diameter of Inner Pipe
010: DN10
…
080: DN80
…
150: DN150
Design Pressure
08: 8bar
16: 16bar
25: 25bar
32: 32bar
40: 40bar
Material of Inner Pipe
A: SS304
B: SS304L
C: SS316
D: SS316L
E: Other
3.1 Static Vacuum Insulated Cryogenic Flexible Hose
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHSB01008X |
Vacuum Bayonet Connection Type with Clamps for Static Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8 bar
|
300 Series Stainless Steel |
ASME B31.3 |
X:
Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHSB01508X |
DN15, 1/2" |
|||||
|
HLHSB02008X |
DN20, 3/4" |
|||||
|
HLHSB02508X |
DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 8 bar. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (≤16 bar), Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHSF01000X |
Vacuum Bayonet Connection Type with Flanges and Bolts for Static Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~16 bar |
300 Stainless Steel |
ASME B31.3 |
00:
Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHSF01500X |
DN15, 1/2" |
|||||
|
HLHSF02000X |
DN20, 3/4" |
|||||
|
HLHSF02500X |
DN25, 1" |
|||||
|
HLHSF03200X |
DN32, 1-1/4" |
|||||
|
HLHSF04000X |
DN40, 1-1/2" |
|||||
|
HLHSF05000X |
DN50, 2" |
|||||
|
HLHSF06500X |
DN65, 2-1/2" |
|||||
|
HLHSF08000X |
DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHSW01000X |
Welded Connection Type for Static Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~40 bar |
300 Stainless Steel |
ASME B31.3 |
00:
Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHSW01500X |
DN15, 1/2" |
|||||
|
HLHSW02000X |
DN20, 3/4" |
|||||
|
HLHSW02500X |
DN25, 1" |
|||||
|
HLHSW03200X |
DN32, 1-1/4" |
|||||
|
HLHSW04000X |
DN40, 1-1/2" |
|||||
|
HLHSW05000X |
DN50, 2" |
|||||
|
HLHSW06500X |
DN65, 2-1/2" |
|||||
|
HLHSW08000X |
DN80, 3" |
|||||
|
HLHSW10000X |
DN100, 4" |
|||||
|
HLHSW12500X |
DN125, 5" |
|||||
|
HLHSW15000X |
DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHST01000X |
Vacuum Bayonet Connection Type with Clamps for Static Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~16 bar |
300 Stainless Steel |
ASME B31.3 |
00:
Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHSB01500X |
DN15, 1/2" |
|||||
|
HLHSB02000X |
DN20, 3/4" |
|||||
|
HLHSB02500X |
DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
3.2Dynamic Vacuum Insulated Piping System
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHDB01008X |
Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8 bar
|
300 Series Stainless Steel |
ASME B31.3 |
X:Material of Inner Pipe.
A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHDB01508X |
DN15, 1/2" |
|||||
|
HLHDB02008X |
DN20, 3/4" |
|||||
|
HLHDB02508X |
DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 8 bar. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (≤16 bar), Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHDF01000X |
Vacuum Bayonet Connection Type with Flanges and Bolts for Dynamic Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~16 bar |
300 Stainless Steel |
ASME B31.3 |
00: Design Pressure.
08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHDF01500X |
DN15, 1/2" |
|||||
|
HLHDF02000X |
DN20, 3/4" |
|||||
|
HLHDF02500X |
DN25, 1" |
|||||
|
HLHDF03200X |
DN32, 1-1/4" |
|||||
|
HLHDF04000X |
DN40, 1-1/2" |
|||||
|
HLHDF05000X |
DN50, 2" |
|||||
|
HLHDF06500X |
DN65, 2-1/2" |
|||||
|
HLHDF08000X |
DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHDW01000X |
Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~40 bar |
Stainless Steel 304, 304L, 316, 316L |
ASME B31.3 |
00:
Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHDW01500X |
DN15, 1/2" |
|||||
|
HLHDW02000X |
DN20, 3/4" |
|||||
|
HLHDW02500X |
DN25, 1" |
|||||
|
HLHDW03200X |
DN32, 1-1/4" |
|||||
|
HLHDW04000X |
DN40, 1-1/2" |
|||||
|
HLHDW05000X |
DN50, 2" |
|||||
|
HLHDW06500X |
DN65, 2-1/2" |
|||||
|
HLHDW08000X |
DN80, 3" |
|||||
|
HLHDW10000X |
DN100, 4" |
|||||
|
HLHDW12500X |
DN125, 5" |
|||||
|
HLHDW15000X |
DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
|
Model |
Connection Type |
Nominal Diameter of Inner Pipe |
Design Pressure |
Material of Inner Pipe |
Standard |
Remark |
|
HLHDT01000X |
Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose |
DN10, 3/8" |
8~16 bar |
300 Stainless Steel |
ASME B31.3 |
00:
Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
|
HLHDB01500X |
DN15, 1/2" |
|||||
|
HLHDB02000X |
DN20, 3/4" |
|||||
|
HLHDB02500X |
DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
