Leading Manufacturer for Lo2 - Vacuum Insulated Phase Separator Series – Holy
Leading Manufacturer for Lo2 - Vacuum Insulated Phase Separator Series – Holy Detail:
Product Application
The product series of Phase Separator, Vacuum Pipe, Vacuum Hose and Vacuum Valve in HL Cryogenic Equipment Company, which passed through a series of extremely strict technical treatments, are used for transferring of liquid oxygen, liquid nitrogen, liquid argon, liquid hydrogen, liquid helium, LEG and LNG, and these products are serviced for cryogenic equipment (e.g. cryogenic storage tank, dewar and coldbox etc.) in industries of air separation, gases, aviation, electronics, superconductor, chips, pharmacy, biobank, food & beverage, automation assembly, chemical engineering, iron & steel, rubber, new material manufacturing and scientific research etc.
Vacuum Insulated Phase Separator
The Vacuum Insulated Phase Separator, namely Vapor Vent, is one of the most common equipment of Vacuum Insulated Cryogenic Piping System. The phase separator is mainly to separate the gas from the cryogenic liquid, which can ensure,
1. Liquid supply volume and speed： eliminate insufficient liquid flow and velocity caused by gas barrier.
2. Incoming temperature of terminal equipment: eliminate the temperature instability of cryogenic liquid due to slag inclusion in gas, which leads to the production conditions of terminal equipment.
3. Pressure adjustment (reducing) and stability: eliminate the pressure fluctuation caused by the continuous formation of gas.
The Phase Separator is a mechanical structure and system that does not require pneumatic and electrical source. Usually choose 304 stainless steel production, can also choose other 300 series stainless steel according to the requirements. The Phase Separator is mainly used for liquid nitrogen service and recommended to be placed at the highest point of the piping system to ensure maximum effect, since gas has a lower specific gravity than liquid.
There are three type of separators to satisfy various demands,
1.HLSP1000 series, a common phase separator.
2.HLSR1000 series, a pressure step-down regulating phase separator and suitable for some special control requirements.
3.HLSC1000 series, a special phase separator uses for Molecular Beam Epitaxy (MBE) System.
About the Phase Separator / Vapor Vent more personalized and detailed questions, please contact HL Cryogenic Equipment directly, we will serve you whole-heartedly!
Parameter Information
| Name | Phase Separator |
| Model | HLSP1000 |
| Pressure Regulation | No |
| Design Pressure | ≤40bar (4.0MPa) |
| Design Temperature | -196℃~ 60℃ |
| Insulation Type | Vacuum Insulation |
| Effective Volume | 10L |
| Material | 300 Series Stainless Steel |
| Medium | Liquid Nitrogen |
| Description |
|
| Name | Pressure Regulating Phase Separator |
| Model | HLSR1000 |
| Pressure Regulation | Yes |
| Design Pressure | ≤40bar (4.0MPa) |
| Design Temperature | -196℃~ 60℃ |
| Insulation Type | Vacuum Insulation |
| Effective Volume | 10L |
| Material | 300 Series Stainless Steel |
| Medium | Liquid Nitrogen |
| Description |
|
| Name | Special Phase Separator for MBE Equipment |
| Model | HLSC1000 |
| Pressure Regulation | No |
| Design Pressure | Determine according to MBE Equipment |
| Design Temperature | -196℃~ 60℃ |
| Insulation Type | Vacuum Insulation |
| Effective Volume | Determine according to MBE Equipment |
| Material | 300 Series Stainless Steel |
| Medium | Liquid Nitrogen |
| Description | A Special Phase Separator for MBE equipment with Multiple Cryogenic Liquid Inlet and Outlet with automatic control function meets the requirement of gas emission, recycled liquid nitrogen and temperature of liquid nitrogen.
|
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Leading Manufacturer for Lo2 - Vacuum Insulated Phase Separator Series – Holy , The product will supply to all over the world, such as: UK, Provence, Naples, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Roxanne from Russia - 2018.02.08 16:45
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Kevin Ellyson from Mauritius - 2017.08.15 12:36
