100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We always get the job done being a tangible workforce making sure that we can easily give you the very best quality as well as finest selling price for Liquid Argon , Cryo Liquid , Lo2 , Our products are strictly inspected before exporting , So we gain a good reputation all over the world. We looking forward to cooperation with you in the future.
100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy Detail:

Product Application

The product series of Phase Separator, Vacuum Pipe, Vacuum Hose and Vacuum Valve in HL Cryogenic Equipment Company, which passed through a series of extremely strict technical treatments, are used for transferring of liquid oxygen, liquid nitrogen, liquid argon, liquid hydrogen, liquid helium, LEG and LNG, and these products are serviced for cryogenic equipment (e.g. cryogenic storage tank, dewar and coldbox etc.) in industries of air separation, gases, aviation, electronics, superconductor, chips, pharmacy, biobank, food & beverage, automation assembly, chemical engineering, iron & steel, rubber, new material manufacturing and scientific research etc.

Vacuum Insulated Phase Separator

The Vacuum Insulated Phase Separator, namely Vapor Vent, is one of the most common equipment of Vacuum Insulated Cryogenic Piping System. The phase separator is mainly to separate the gas from the cryogenic liquid, which can ensure,

1. Liquid supply volume and speed: eliminate insufficient liquid flow and velocity caused by gas barrier.

2. Incoming temperature of terminal equipment: eliminate the temperature instability of cryogenic liquid due to slag inclusion in gas, which leads to the production conditions of terminal equipment.

3. Pressure adjustment (reducing) and stability: eliminate the pressure fluctuation caused by the continuous formation of gas.

The Phase Separator is a mechanical structure and system that does not require pneumatic and electrical source. Usually choose 304 stainless steel production, can also choose other 300 series stainless steel according to the requirements. The Phase Separator is mainly used for liquid nitrogen service and recommended to be placed at the highest point of the piping system to ensure maximum effect, since gas has a lower specific gravity than liquid.

There are three type of separators to satisfy various demands,

1.HLSP1000 series, a common phase separator.

2.HLSR1000 series, a pressure step-down regulating phase separator and suitable for some special control requirements.

3.HLSC1000 series, a special phase separator uses for Molecular Beam Epitaxy (MBE) System.

About the Phase Separator / Vapor Vent more personalized and detailed questions, please contact HL Cryogenic Equipment directly, we will serve you whole-heartedly!

Parameter Information

Name Phase Separator
Model HLSP1000
Pressure Regulation No
Design Pressure ≤40bar (4.0MPa)
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume 10L
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description
  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. No power supply, no manual control.
  5. It can be customized according to the special requirements of users.

 

Name Pressure Regulating Phase Separator
Model HLSR1000
Pressure Regulation Yes
Design Pressure ≤40bar (4.0MPa)
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume 10L
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description
  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. Automatically, without power supply and manual control.
  5. It can be customized according to the special requirements of users.

 

Name Special Phase Separator for MBE Equipment
Model HLSC1000
Pressure Regulation No
Design Pressure Determine according to MBE Equipment
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume Determine according to MBE Equipment
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description A Special Phase Separator for MBE equipment with Multiple Cryogenic Liquid Inlet and Outlet with automatic control function meets the requirement of gas emission, recycled liquid nitrogen and temperature of liquid nitrogen.

 

  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. Automatically, without power supply and manual control.
  5. It can be customized according to the special requirements of users.

Product detail pictures:

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures

100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy detail pictures


Related Product Guide:

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for 100% Original Factory Dewar - Vacuum Insulated Phase Separator Series – Holy , The product will supply to all over the world, such as: Sweden, Plymouth, Myanmar, Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We've been able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and items. For anyone who is interested in our company and products, be sure to make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are about to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please genuinely feel no cost to speak to us for enterprise. nd we believe we have been gonna share the most effective trading practical experience with all our merchants.
  • The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
    5 Stars By Rosemary from Mexico - 2018.12.05 13:53
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Elsie from Eindhoven - 2017.01.11 17:15