Good Quality Bayonet Coupling - Gas-liquid Barrier – Holy
Good Quality Bayonet Coupling - Gas-liquid Barrier – Holy Detail:
Product Application
The all series of vacuum jacketed equipment in HL Cryogenic Equipment Company, which passed through a series of extremely strict technical treatments, are used for transferring of liquid oxygen, liquid nitrogen, liquid argon, liquid hydrogen, liquid helium, LEG and LNG, and these products are serviced for cryogenic equipment (e.g. cryogenic tanks and dewars etc.) in industries of gases, aviation, electronics, superconductor, chips, pharmacy, hospital, bio bank, food & beverage, automation assembly, new materials, rubber manufacturing and scientific research etc.
Vacuum Insulated Shut-off Valve
The Vacuum Gas-liquid Barrier is placed in the vertical VJ pipe at the end of VJ piping. The Gas-liquid Barrier uses the gas seal principle to block the heat from the end of the VJ pipe into the whole VJ Piping, and effectively reduce the loss of liquid nitrogen during discontinuous and intermittent service of the system.
Because there is usually a small section of non-vacuum pipe at the end of the VJ piping where it is connected to the terminal equipment, this part of the non-vacuum pipe will bring a huge heat loss to the whole vacuum system. A difference of more than 200 degrees Celsius between the ambient temperature and the liquid nitrogen of -196 °C would result in significant gasification (loss of liquid nitrogen) in the VJ piping, while the large amount of vaporization would also cause pressure instability in the VJ piping.
The vacuum gas-liquid barrier is designed to limit this heat transfer into the VJ piping and to minimize liquid nitrogen losses during frequent discontinuous use of liquid nitrogen in terminal equipment.
The Gas-liquid Barrier does not require power to operate. It and VI Pipe or Hose are prefabricated into one pipeline in the manufactory, and there is no need for installation and insulated treatment on site.
More detailed and personalized questions, please contact HL cryogenic equipment directly, we will serve you wholeheartedly!
Parameter Information
Model | HLEB000 Series |
Nominal Diameter | DN10 ~ DN25 (1/2″ ~ 1″) |
Medium | LN2 |
Material | 300 Series Stainless Steel |
On-site Installation | No |
On-site Insulated Treatment | No |
Product detail pictures:

Related Product Guide:
All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for Good Quality Bayonet Coupling - Gas-liquid Barrier – Holy , The product will supply to all over the world, such as: Salt Lake City, French, Toronto, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
